One-piece versatile design, allowing quick installation and accommodating a wide range of cable sizes
Cold shrink delivery system for easy installation, simply place termination over prepared cable and unwind core to shrink into place (no force fit required)
High-k stress control, specially formulated high dielectric constant material minimizes surface stress by more uniformly distributing the electrical field over the entire surface of the insulator
Silicone rubber insulators, EPDM stress control tubes, stress controlling compound and environmental sealing compound are compatible with all common solid dielectric insulations, such as polyethylene (PE), cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR)
No torches or heat required
Excellent thermal stability
Good solvent resistance, compatible with industry-approved cable cleaners
Excellent resistance to ozone and ultra-violet radiation
3M Cold shrink QT-III termination kit is designed for tape shielded, wire shielded and Unishield ® cables. Kit includes three high-K, tracking resistant, silicone rubber terminations, three silicone rubber phase re-jacketing sleeve assemblies, three constant force springs and three strips 3M EMI copper foil shielding tape 1181. Kit includes a pre-formed ground braid, a cable cleaning preparation kit CC-2 and an instruction sheet.
Kit is ideal for 5 kilo-Volts cable with 800 kcmil-1000 kcmil conductor size and 8 kilo-Volts cable with 700 - 1000 kcmil conductor sizes. It is perfect for 15 kilo-Volts cable with 500 - 750 kcmil conductor sizes. Cable has 1.18 - 1.52 Inch insulation. It has basic insulation level of 110 kilo-Volts.
Cable termination kit is compatible with 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil, 800 kcmil and 900 kcmil conductor sizes. Cable insulation has 1.18 - 1.52 Inch outer diameter. It is designed for cabinet-mount fittings and can be used on cables with or without internal ground wires. Kit has compact design that provides quick installation in restricted spaces. It has applications in solid dielectric insulations such as polyethylene, XLP and EPR. Kit is suitable for contaminated and non-contaminated indoor locations. It meets AEIC, IEC and JIS standards.
|Cable Type||Tape Shield; UniShield(R); Wire Shield|
|Catalog Description||3MÖ Cold Shrink QT III 7600 T 3 RJS Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.|
|Conductor Size||500 kcmil; 600 kcmil; 700 kcmil; 750 kcmil; 800 kcmil; 900 kcmil|
|Number Of Terminals||3|
|Standard||AEIC; IEC; JIS|