These cold shrink kits require no heat, special tools or special skills to install
No torch or heat required
Detailed Description: 3M Unishield® Cold shrink shield adapter kit in black color includes tubular sleeve and three base mastic sealing strips that are made of rubber for added durability/strength. Kit has a tensile strength of 1400 psi and is apt for providing 750% ultimate elongation. It is resistant to ozone/ultraviolet light, acids/alkalis and aims in providing tight seals to retain resiliency/pressure for prolonged service. It offers efficient tear resistance of 150 psi with a 300% stretching of modulus 480 psi. It has a dielectric strength of 365 Volts-mil and includes a force spring for perfect three-conductor installation. It has a current rating of 600 Amps. Kit accommodates wide range of conductor wires that includes 500 - 1000 AWG at 5/8 kilo-Volts, 350 - 1000 AWG at 15 kilo-Volts, 350 - 750 AWG at 25 kilo-Volts and 2/0 - 350 AWG at 35 kilo-Volts. It has a minimal seal diameter of size 1.27 inches and maximum installed diameter of size 2.17 inches. Adapter kit meets ANSI standards.
|Application||"""designed for grounding and sealing Tape Shielding, Wire Shielding, Unishield shielded power cables when using cable accessories such as elbows, modular splices and terminations"""|
|Catalog Description||3MÖ 8459 Cold Shrink Shield Adapter Kit is designed to provide sealing and grounding applications on longitudinally corrugated, conventional tape, wire and UniShield« power cables. It is rated for 5 to 8 kV and 600 amps cables. This kit offers resistance to acids, alkalis, ozone, ultraviolet light and fungus.|
|Included||"""1 cold shrink sealing tube, 3 mastic sealing strips, 1 constant force spring, 1 preformed ground braid/bleeder wire, 1 strip Scotch 13 semi conductive tape, 1 instruction sheet"""|
|Special Features||1 kit per case|
|Type||Cold Shrink Shield Adaptor Kit|