Dimension: 55 Inch Length x 8.600 Inch Width x 5.700 Inch Height
Ballast options available for nearly all U.S. and foreign voltage and frequency combinations
Actuator allows access to lamps and ballast compartment - no tools required
Latch assembly and elastomer type gasket provide positive seal from water ingress
Safety switch (supplied as standard) disconnects power to lamps and ballast when lens is open
Reflector is hinged for easy single handed entry to ballast compartment
Actuator can be removed for tamper-resistant applications
Highly reflective white polycarbonate internal reflector, zinc plated steel chain ring bolts
Detailed Description:
Appleton 2 Light fluorescent luminaire is ideal for marine/wet, hazardous/adverse, indoor/outdoor locations to protect against dirt, water and moisture. Its applications include oil refineries, petrochemical, pulp/paper mills, food processing, warehouses, underground tunnels and general manufacturing facilities. It features corrosion-resistant fiberglass reinforced polyester construction with impact-resistant polycarbonate lens/lamp holders for easy access to lamp. Fixture consists of 3/4 Inch stainless steel hubs, actuator for access to lamps/ballast, latch assembly, elastomer gasket for positive seal from water ingress and refectory for 1-hand entry to ballast.
Fixture has safety switch that disconnects power to lamps and ballast when lens is open and actuator can be removed for tamper-resistant applications. It offers high degree of corrosion resistance and low operating costs than incandescent fixtures to provide more lumens per watt. It measures 55 Inch x 8.600 Inch x 5.700 Inch and has voltage rating of 120/277 Volts. Fixture has two lamps of T12 type with power rating of 40 Watts.
Application | For Use In Marine And Wet Locations, Hazardous And Adverse Locations, Indoor Or Outdoor Use Where Protection Against Dirt, Water And Moisture Is Necessary, Oil Refineries, Petrochemical Facilities, Pulp And Paper Mills, Food Processing Plants, Warehouses, Underground Tunnels And General Manufacturing Facilities |
Brand | Appleton |
Catalog Description | Appleton FV Series Nonmetallic Fluorescent Luminaire, Lamp Type: (2) 40 WTT 3050 LM T12 Rapid Start, Lamp Wattage: 40 WTT, Voltage Rating: 120 - 277 V, Number Of Lamps: 2, Material: Stainless Steel Hub, Polycarbonate Lampholder, Fixture Wattage: 80 WTT, Length: 55 IN, Width: 8.6 IN, Height: 5.7 IN, Housing Material: Fiberglass Reinforced Polyester, Ambient Temperature Range: 40 DEG C, Temperature Range: 18 DEG C (Minimum Starting), 75 DEG C (Supply Wire), Lens Material: Polycarbonate, Hub Size: 3/4 IN, Reflector/Refractor: Highly Reflective White Polycarbonate Internal Reflector, Frequency Rating: 50/60 HZ, Standard: Class I, Division 2, Groups A, B, C, D, Class I, Zone 2, Group IIC, Class II, Division 2, Groups F, G, Type 4X, UL Listed: E10794, 1598, 1598A, 844, 60079-0, 60079-15, CSA Certified: C22.2 No. 250, C22. 2 No. 137, CAN E60079-0, CAN E60079-15, cUL Listed: E10794, For Use In Marine And Wet Locations, Hazardous And Adverse Locations, Indoor Or Outdoor Use Where Protection Against Dirt, Water And Moisture Is Necessary, Oil Refineries, Petrochemical Facilities, Pulp And Paper Mills, Food Processing Plants, Warehouses, Underground Tunnels And General Manufacturing Facilities |
GTIN |
00781381184731 |
Height | 5.7 |
Height Unit | IN |
Item Status | A |
Lamp Type | (2) 40 WTT 3050 LM T12 Rapid Start |
Length | 55 |
Length UOM | IN |
Material | Stainless Steel Hub, Polycarbonate Lampholder |
Mfr. # | FVR240BU |
Number Of Lamps | 2 |
Special Features | Low operating costs provide more LM/WTT than incandescent fixtures; Impact-resistant polycarbonate lens is hinged to allow easy access to lamp compartment; Corrosion-resistant fiberglass reinforced polyester housing; Actuator allows access to lamps and ballast compartment - no tools required; Latch assembly and elastomer type gasket provide positive seal from water ingress; Safety switch (supplied as standard) disconnects power to lamps and ballast when lens is open; Reflector is hinged for easy single-handed entry to ballast compartment; Actuator can be removed for tamper-resistant applications; For use in locations where a high degree of corrosion resistance is required |
Standard | Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Group IIC; Class II, Division 2, Groups F, G; Type 4X; UL Listed: E10794, 1598, 1598A, 844, 60079-0, 60079-15; CSA Certified: C22.2 No. 250, C22. 2 No. 137, CAN E60079-0, CAN E60079-15; cUL Listed: E10794 |
Type | FV Series Nonmetallic Fluorescent Luminaire |
UNSPSC | 39111501 |
Voltage Rating | 120 - 277 |
Width | 8.6 |
Width UOM | IN |