Eaton / Cutler Hammer C441R Ethernet Module; 120 Volt AC, 15 Milli-Amp

Detailed Description: Eaton Ethernet module is suitable for use with C441 motor insight and S611 soft starter. It offers four AC input points and is rated at 120 VAC/15 milli-Amps at 50/60 Hz. It offers maximum signal delay of 30 milli-seconds. It has operating voltage range of 80 - 140 VAC. Module supports ethernet/IP/modbus TCP protocol. It has integrated web page that helps in device monitoring. Module works at a speed of 10/100 MB with wire as media. It operates at a temperature of -20 to 50 deg C. Module operate at an altitude of 6000 ft. It withstands shock resistance of 15 GN in any direction for 11 milli-seconds. It withstands vibration of 5 GN at maximum peak-to-peak distance of 0.7 mm at 5 - 150 Hz. It has pollution degree of 2 and is IP20 rated for use in hazardous location. It is designed to be installed on right side of motor. It measures 4.840 Inch x 4.920 Inch. Module is UL listed and CSA certified.