Eaton / Cutler Hammer DT363FRK 3-Wire Fusible Heavy Duty Safety Switch; 100 Amp, 600 Volt AC/250 Volt DC, 3-Pole, NEMA 3R, TPDT

Detailed Description: Eaton / Cutler Hammer 3-Pole Double-throw switch is designed to transfer service from normal power source to alternate power source or switches one load circuit to another. It is suitable for installing in control NEMA 3R rainproof enclosure. It uses double-break, quick-make and quick-break rotary blade mechanism for faster switching operation. It uses standard H-type time delay fuse for providing protection to low voltage electrical installation against short-circuit/overload current. It has power rating of 30/40 hp at 1-Phase 480/600 VAC and 60/75 hp at 3-Phase 480/600 VAC. It measures 11.190 Inch x 11.950 Inch x 37.020 Inch.

Switch has two points of contact that provides positive open and close for easier switching mechanism. Heavy-duty switch has voltage rating of 600 VAC/250 VDC and current rating of 100 Amps. It uses large hasp that accommodates up to three 3/8-Inch shanks for providing triple padlocking capability to prevent access to unauthorized user. It has clearly visible rotary handle for working in low light area. De-ionizing arc chutes are used in switch for suppressing arc produced by opening contacts under load.

Switch is provided with ample wire bending space for easier installation. Clear line shield feature in switch protects against accidental contact with energized parts and is supplied with probe hole for testing energized line without removing shield. Tangential knockouts on top, side and bottom enables easy access to conduit. Additional locking option is provided with switch for padlocking top and bottom of cabinet door. It is 100% load-make and load-break rated. Switch is UL listed.