Size: 11.020 Inch Length x 7.870 Inch Width x 6.300 Inch Height
Drop-out Protection - requires the equipment be restarted in the event of a power-loss
Eaton / Cutler Hammer All-in-one EMS panel is featured with small control panel and a pushbutton control station. It comes equipped with a disconnect means with lock-out capability is provided on the primary control panel. Pushbutton control station features momentary start button that requires the operator to restart the equipment following an unexpected power loss. It contains a stop button with emergency stop button for normal stopping of the equipment during operation. It features a self-protected combination motor controller for additional short-circuit protection. It provides motor overload protection from damage due to overuse or excess heat.
Panel features auxiliary contact from A to interface with third party monitoring. It measures 11.020 Inch x 7.870 Inch x 6.300 Inch. It has overload relay setting of 1.6 - 2.5 Amps provides fast, reliable protection. Coil produces a voltage of 208 VAC and cause high frequency interference at 60 Hz. It has a current rating of 20 Amps AC. It has 1/2 hp rating at 230 Volts and 1 hp at 460 Volts for three phases. It features NEMA 4X enclosures to offer protection from corrosion and extreme environments for indoor or outdoor use. EMS panel is UL listed.
|Application||Ind Facilities & Factories - Facility - Other|
|Catalog Description||Eaton EMS electronic motor starter, All-in-One Panel, 208V, 1.6 to 2.5 FLA|
|Type||Electronic motor starter|