Eaton / Cutler Hammer EMS02H5ABM EMS Panel; 10 - 16 Amp Full Load, 120 Volt AC

Detailed Description: Eaton / Cutler Hammer All-in-one EMS panel is featured with control panel and a pushbutton control station. It comes equipped with a disconnect means with lock-out capability is provided on the primary control panel. Pushbutton control station features momentary start button that requires the operator to restart the equipment following an unexpected power loss. It contains a stop button with emergency stop button for normal stopping of the equipment during operation. It features a self-protected combination motor controller for additional short-circuit protection. It provides motor overload protection from damage due to overuse or excess heat.

Panel features auxiliary contact from A to interface with third party monitoring. It measures 11.020 Inch x 7.870 Inch x 6.300 Inch. It has overload relay setting of 10 - 16 Amps provides fast, reliable protection. Coil produces a voltage of 120 VAC and cause high frequency interference at 60 Hz. It has a current rating of 40 Amps AC. It has 3 hp at 230 Volts and 10 hp at 460 Volts for three phases. It features NEMA 4X enclosures to offer protection from corrosion and extreme environments for indoor or outdoor use. EMS panel is UL listed.