Panel or DIN rail mounting
IP20 finger and back-of-hand proof
AC and DC controlled contactors in the same compact frame
Low power consumption DC coils
Built-in NO or NC auxiliary contacts to 32 Amp
Plug-in accessories for reduced installation time
Integrated suppressor for DC operated contactors
Non-reversing contactors are most commonly used to switch motor loads in applications where running over current protection is either not required or is provided separately
Detailed Description: Eaton 3-Pole Frame C non-reversing IEC contactor has a compact and space saving design that allows easy install XT line of contactor. It measures 3.35 Inch x 1.77 Inch x 3.82 Inch and has a frame size of 45 mm. It has a full load inductive and resistive current rating of 32/45 Amps. It has a one-phase power rating of 3 Hp at 115 Volts, 5 Hp at 200/230 Volts. It also has three-phase power rating of 10 Hp at 200/230 Volts, 20 Hp at 460 Volts and 25 Hp at 575 Volts. It has a built-in 1NO form auxiliary contact with open enclosure. Coil has a full voltage rating of 110/120 VAC at 50/60 Hz. It is mounted on a panel/DIN rail up to current rating of 65 Amps. Contactor is suitable in to switch motor load applications. It has a NEMA rating that attains IP20 deg of protection to finger/back-of-hand. It has an operating temperature rating from 25 - 50 deg C. Contactor is UL listed, CE/CSA/CCC/ATEX certified and meets IEC EN 60947 standards.
Amperage Rating | 32 Amp |
Brand | Eaton / Cutler Hammer |
Coil Voltage | 120 Volt |
Connection | Screw Terminal |
Contact Configuration | NO |
Degree Of Protection | IP20 |
Item | Non-Reversing Contactor |
Mfr. # | XTCE032C10A |
Motor Power | 20 hp at 460/480 Volt 3 Phase, 10 hp at 230/240 Volt 3 Phase, 3 hp at 115 Volt 1 Phase, 5 hp at 230/240 Volt 1 Phase, 10 hp at 200/208 Volt 3 Phase, 25 hp at 575/600 Volt 3 Phase |
Mounting | DIN-Rail/Panel |
Number Of Poles | 3 |
Size | 3.35 Inch x 1.77 Inch x 3.82 Inch |
Standards | UL Listed, CE, CSA, CCC, ATEX Certified, IEC EN 60947 |