Dimension: 2.950 Inch Dia x 5 Inch Length
Density: 1.05 g/cubic-cm
Ideal Thermo-Shrink® Ratio heat shrinkable end cap is made of thermally stabilized cross-linked polyolefin and is coated with specially designed hot melt adhesive to ensure environment seal. It creates watertight seal to protect the ends of power and control cords. It effectively offers protection against oxidation, ozone, UV radiation and other harmful environmental conditions. End cap fits cable of size 1.770 - 2.760 Inch easily and protects up to 1000 Volts rated power cables. It is recommended for both open air and underground power distribution cables that uses PVC, lead or XLPE sheaths. It operates within temperature range of range of -55 to 110 deg C.
End cap has 1.05 g/cm.cube for strong bonding, dielectric strength greater than 15 kV/mil and tensile strength greater than 14 MPa. It measures 2.950 Inch diameter x 5 Inch. End cap can be elongated up to 400% of the original size and has volume resistance of 10^14 Ohm/cm. It has wall thickness of 0.160-Inch for providing excellent fluid resistance. End cap elongates up to 300% of the original size after aging at 150 deg C for about 168 hours.
|Catalog Description||IDEAL, Heat Shrinkable Tube, Thermo-Shrink«, Medium-Wall Heat Shrink, Thickness: 0.138 IN, Length: 4-1/2 (End Cap) IN, Dielectric Strength: Less Than 15 KV/MM IEC 243, Volume Resistivity: 1014 OHM.CM For IEC 93, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2000 - 2500 MCM, Nominal Recoveredi.d. (max.): 1.380 IN, Expanded I.d. (min.): 2.950, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR|
|Continuous Operating Temperature||-55 DEG CC To 110 DEG C IEC 216|
|Dielectric Strength||Less Than 15 KV/MM IEC 243|
|Special Features||Features: TS-46 irradiated cross-linked polyolefin; Adhesive liner provides complete environmental protection and insulation; Provide water-tight seal and resist corrosion, oils and chemicals;Protect cable ends during storage; Shrink temperature of 120C;Rated for 600V / 1000V, 90C continuous use; Creates a watertight seal to protect ends of power and control cords; Protects against oxidation, ozone, UV radiation, etc; Coated with hot melt adhesive to ensure environment seal; Fits easily over end of cable; Protect power cables up to 1000V and telecommunication cable; Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths; Thermally stabilized cross-linked polylelin, coated with specially designed hot melt adhesive; Cable Range: 2000 - 2500 MCM; Nominal Recoveredi.d. (max.): 1.380 IN; Expanded I.d. (min.): 2.950; Elongation At Break: ASTM D 638, Less Than 400%; Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR|
|Type||Medium-Wall Heat Shrink|
|Volume Resistivity||1014 OHM.CM For IEC 93|