Size: 4.100 Inch Width x 1.900 Inch Depth x 10.600 Inch Height
1000-A True RMS clamps for a variety of industrial and commercial environments
Easy to read displays feature large numbers and green glowing backlight
includes leads, alligator clip and case
Battery life- 100 Hours typical (alkaline) (61-775)
Ideal® TightSight® 770 Series Clamp meter with TRMS, capacitance, frequency has selectable visual and audible indication in the presence of voltage. It has an indicator to sense the continuity of the device that signals when the resistance goes below 30 Ohm. It has a bright, bold backlight that turns off automatically after 3 minutes to conserve battery power. Meter has peak mode that displays the peak value of AC Volts or current measurements, max/min mode to capture maximum or minimum values over time, hold button to lock the values during measurement.
Meter features a selectable low battery indicator and auto power OFF mode that turns off after 30 minutes. It has tapered jaws of size 2 inches with hook tip to hold the clamp securely and reach tight spaces.Meter provides electronic overload protection on all ranges and has high frequency reject circuit to filter noise as well as to make accurate measurements. It measures 3.100 Inch x 1.800 Inch x 8.700 Inch and has 100-hour continuous with alkaline battery. Large numbers and symbols are displayed by TightSight® bottom display.
Clamp meter can measure true rms values, AC voltage of 0.0 - 750.0 Volts with 1.0% accuracy, DC voltage of 0.0 - 999.9 Volts with 1.0% accuracy, AC/DC current of 0.0 - 999.9 Amps with 2.0% accuracy, resistance of 0.0 - 9999 Ohm with 1.5% accuracy, capacitance of 0.0 - 999.9µF with 5.0% accuracy, frequency of 20.0 - 400.0 Hz with 0.5% accuracy. Clamp meter is UL listed, CE certified and meets CAT III-1000V requirements.
|Dimensions||10.600 IN Height X 4.100 IN Width X 1.900 IN Depth|
|Accuracy||Stated Accuracy At 23 DEG C Plus Or Minus 5 DEG C, Less Than 75 PCT R.H|
|Application||For A Variety Of Industrial And Commercial Environments|
|Battery||100 HR Continuous With Alkaline (61-763, 61-765) (1) 9 V Battery (NEDA 1604, JIS 006P, IEC 6F22) With An Isolated Battery Compartment|
|Capacitance||0 To 999.9 MFD At 5 PCT Plus 15 Accuracy|
|Catalog Description||IDEAL, Clamp Meter, TightSight, 770 Series With TRMS, Capacitance, Frequency, Resistance: 0 To 999.9 OHM , 1000 To 9999 OHM At 1.5 PCT + 5 Accuracy, Capacitance: 0 To 999.9 MFD At 5 PCT Plus 15 Accuracy, Display: 4 Digit LCD With 9999 Counts For Both Displays With 41 Segment|
|Display||4 Digit LCD With 9999 Counts For Both Displays With 41 Segment|
|Resistance||0 To 999.9 OHM , 1000 To 9999 OHM At 1.5 PCT + 5 Accuracy|
|Special Features||Features: 1000 A True Rms Clamps For A Variety Of Industrial And Commercial Environments; Unique Tightsight Bottom Display Makes Hard-To-Reach Measurements Convenient; Easy-To-Read Displays Feature Large Numbers And Green Glowing Backlight; Cat IV Rating For Maximum Safety; Frequency, Capacitance, Peak, Data Hold, Max/Min; Selectable Audible And Visual Voltage Alerts On AC/DC Voltage Functions; Frequency Via Clamp Head Or Test Leads; High Frequency Rejection*; * High Frequency Rejection (Hfr) And Emi Shielding Features Provide Accurate Voltage/Frequency Readings On Non-Sinusoidal Wave Forms, Such As Adjustable Speed Drives; Audible Continuity; Selectable Auto Power Off;CAT III- 1000V Rating; Tapered Jaws With Hook Tip; Measures AC Current; Low Battery Indicator**; ** Low Battery Indicator - The Low Battery Symbol Will Appear And Indicate Approximately One Hour Of Operation Remaining Before The Unit Displays Batt And Shuts Off To Prevent Inaccurate Readings; Jaw Size: 2 IN; Ac Voltage: 0 To 600 V At 1 PCT Plus 5 Accuracy, 600 To 750 V At 1.5 PCT Plus 5 Accuracy, 0 To 750 V At 6 PCT Plus 5 Accuracy; Dc Voltage: 0 To 600 V At 1 PCT Plus 5 Accuracy, 600 To 999.9 V At 1.5 PCT Plus 5 Accuracy; Dc Current: 0 To 999.9 AMP At 2 PCT Plus 5 Accuracy; Ac Current: 0 To 999.9 AMP At 2 PCT Plus 5 And 6 PCT Plus 5 Accuracy; Includes: Carrying Case And Test Leads With/Alligator Clips; Replacement Part: 9V Battery, TL-104 Test Leads With/Large Alligator Clips; Continuity: 0 - 999.9 OHM Audible At Less Than 30 Response Time 500 MS; Carrying Case: C-770 Nylon Carrying Case; Max Conductor Size: 2 IN; Frequency Measurement: 20 To 400 HZ At 0.5 PCT Plus 5 Accuracy; Warranty: 2 year|
|Standard||CAT III-1000V, CAT IV - 600V, UL 61010 Listed, CE|
|Temperature Rating||32 to 122|
|Type||770 Series With TRMS, Capacitance, Frequency|