Size: 11.5 Inch Length x 23 Inch Height x 3-3/4 Inch Depth
King Electrical LPWA Series 1-Phase Fan-forced architectural wall heater with anodized aluminum finish has voltage rating of 120 Volts and power rating of 1500 Watts. It has heavy-duty cast iron unit bearing motor that is permanently lubricated with 20 cc of oil reservoir for quiet operation. It has 12-gauge aluminum constructed white color 12-7/8 Inch x 23-1/4 Inch x 1-3/4 Inch grille for providing durability. Motor rotating at full speed of 1300 RPM is used to drive five-blade aluminum fan that delivers 185 cfm of airflow and operates at 40 to 90 deg F. Element assemblies of the heater are constructed from coiled nickel chromium alloy that is wrapped in magnesium oxide insulator for providing sufficient heat. Element assembly is secured in steel sheathed heating tubes in a furnace brazed, plate-finned block design. The 3-Position fan/heat/OFF switch for easy speed/heat control and provides positive OFF option to disconnect all ungrounded conductors.
Heater with a white grille has 20-gauge electro-galvanized steel wallbox with factory installed copper ground wire for easy installation on to wall. Fan of the heater continues to operate after the thermostat shuts OFF in order to remove the residual heat left in the elements. Wall box is provided with three knockouts to provide access for power leads. Safety limit protection option in heater turns OFF the power automatically in the event of overheating. It has manual reset option that is used to turn OFF the device if thermal overload trips due to abnormal operating temperatures. Safety light in heater illuminates if thermal cutout trips turns OFF. It requires 4-Inch of clearance to floors and 6-Inch of clearance to sidewall for wall mounting. It measures 11.5 Inch x 23 Inch x 3-3/4 Inch. Heater is UL listed.