Dimension: 11 Inch Length x 3-2/5 Inch Width x 4.625 Inch Width x 3.100 Inch Cut-Out
For installation into existing sheet rock ceilings where, access is only available from below the ceiling
0.050 Inch white baked enamel one-piece drawn aluminum housing adjusts to a ceiling thickness from 3/8 to 5/8 Inch and terminates at a 1/4 Inch ceiling flange for even positioning of housing angle within the ceiling, structural arm consists of 0.050 Inch steel and connects to housing with junction box, integral springs brackets provided
Have factory installed gaskets to restrict airflow from room into ceiling plenum to less than 2 CFM
Four high tension tempered steel springs secure remodel housing to ceiling, hole cutout template provided for convenience
Pre-wired 15 Cubic-Inch 0.060 Inch galvanized steel junction box, with six 1/2 Inch knockouts, four Romex® pryouts, and snap on cover, all leads are 18 AWG wire, the ground wire is connected to the bottom and quick connectors are supplied on all leads, through branch circuit wiring, (4-in, 4-out)
Standard flex whip carries wire lead from junction box into housing, wire leads extend from housing and thermal device to 4 Inch below housing, terminating at GU10 MR16 socket
Standard UL thermal protector rated for 90 deg C is affixed to side wall surface of housing
Detailed Description:
Nora 3-Inch 3 Inch Remodel air-tight housing is designed for use with 50-Watts/120-Volts MR16 GU10 lamp. It offers crisp MR16 defined illumination to any applications on straight line voltage, without transformers. It accommodates a wide range of superior quality, adjustable finishing trims. Housing requires a minimum of 3-Inch clearance from thermal insulation and 1/2-Inch clearance from adjacent building components. Housing has an adjustable bracket that offers a secure friction to hold at any desired angle. It measures 11 Inch x 3-2/5 Inch x 4.625 Inch and has a cut out of 3.100 inches.
Housing has high-tension, tempered steel springs for even, secure installation into ceiling and is provided with a convenient hole cutout template. Housing includes quick connector along with a junction box containing one 3/4-Inch/two 1/2-Inch knockouts and four Romex pryouts with strain relief for branch circuit wiring. It works with ceiling thickness of up to 5/8 Inch. Housing is cULus damp location listed with feed through, Washington State approved and meets ASTM-283 standards.
Dimensions | 11 Inch Length x 3-2/5 Inch Width x 4.625 Inch Width x 3.100 Inch Cut-out |
Brand | Nora |
Ceiling Type | Non-Insulated |
Construction | Aluminum |
Item | 3 Inch Housing |
Lamp Type | MR16 With 40 deg Beam Spread (Included) |
Mfr. # | NHR-354AT |
Mounting | Ceiling |
Number Of Lamps | 1 |
Shape | Round Aperture |
Standards | cULus Listed For Damp Location w/ Feed Through, Meets or exceeds ASTM-283 Air-Tight Requirements, Washington State Approved |
Type | Line Voltage, Airtight |
Voltage Rating | 120 Volt |