Detailed Description:
Marley 1-Phase Fan-forced heater in off-white color has thermal cutout that can be built into the system to shut off the heater during excess of heat. Louvered front cover of heater has commercial grade steel finish in navajo white baked enamel and features a 10-1/2 Inch x 12-1/2 Inch grille. It has 80/20-gauge nickel chromium resistance wire enclosed steel sheathed and copper-brazed steel fin heating element for added strength. Bi-metallic fan delay of snap-action type allows to activate fan after heating element attains operating temperature and continues its operation until the heating element becomes cool.
Motor is fully enclosed and permanently lubricated to protect from impedance for long lasting. Disconnect switch has a built-in double pole single throw that is allowed for positive disconnect of power supply. It has a voltage rating of 277/240 Volts and current rating of 7.2/6.3/3.6/3.1 Amps. It has a power rating of 2000/1500 Watts and heating capacity of 6826/5119 BTU/hour. Heater is designed to provide an even distribution of heated wind power of 65 cfm. It is designed for recessed installation and uses ceiling mounting to hold firmly. It is designed to use for dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops and in similar areas. Wall heater is cULus listed.
Dimensions | 9-3/4 Inch Width x 3-3/4 Inch Depth x 11 Inch Height |
Air Flow | 65 cfm |
Application | For Dens, Basements, Converted Attics, Breezeways, Garages, Bathrooms, Small Offices, Workshops |
Brand | Marley |
Finish | Baked Enamel |
Finish 2 | Off White |
Grille Dimension | 10-1/2 Inch x 12-1/2 Inch |
Heating Element | Sheathed Steel |
Housing Material | Steel Grille |
Item | Fan-Forced Heater |
Mfr. # | QCH1207F |
Motor Type | Permanently Lubricated And With Totally Enclosed Rotor |
Mounting | Ceiling |
Power Rating | 2000/1500/1000/750 Watt |
Voltage Rating | 240/277 Volt |