NEMA 5 x 5 with 4 x 4 optional spotlight reflector beam spread
RAB Stealth® LED Flood light with sensor in white color features a customizable EZ layout design and senses 110 deg detection. It has non-toxic metallic construction with eco-friendly polyester powder coating for durability and long lasting color. It produces an enhanced output at 100000 hours of operation and minimizes energy consumption by 85%, when compared to 100 Watts PAR38 floodlight. It runs on two class 2 multi-chip/constant current/high output LED drivers rated at 100 - 277 Volts/350 milli-Amps/50 - 60 Hz to provide 48 LPW efficacy, 87% efficiency and 1448 lumens. It has a power rating of 13 Watts and requires an input of 30 Watts. It provides a cool color temperature of 5000 K.
Light has sturdy die-cast aluminum housing and includes high temperature silicone gaskets that are weather-resistant. It requires a minimum temperature of -40 deg F/-40 deg C. Light is equipped with a rugged cast aluminum thermal management system for optimal heat sinking/minimal LED junction temperature. It has NEMA 5 x 5 floodlight reflector with 4 x 4 optional spotlight reflector for field installation. It is also engineered with photometric to provide flood configuration. Lamp features a 7-step MacAdam ellipse binning design for fixture-to-fixture color consistency and uniformity.
Lamp delivers an incandescent switching capacity of 1000 Watts. It is equipped with a LED indicator that glows red night for "on guard" deterrence for daytime indication. It is provided with an automatic override to reset at dawn. It has two flip manual logics to avoid activation by momentary power outages. Lamp has fully shielded circuits for optimum radio frequency immunity. It offers 6000 Volts surge protection for added safety. It has adjustable time of five seconds to 12 minutes and an adjustable wide sensitivity control from 100 - 30%. Lamp features adjustable temperature compensation sensitivity for hot and cold ambient temperatures detection. It comes with a lamp.
Floodlight has a 1/2-Inch NPS threaded mounting arm with O-ring seal and fully adjustable/serrated locking swivel that is suitable for all standard mounting covers for ease of installation. It is provided with sure-grip locks, color matched EZ grip lock nuts and stainless steel screw for precised mounting. It can be mounted within 1.2 m of ground. Lamp comes pre-wired and pre-assembled on a CU4 universal EZ plate. Light is suitable for wet locations and IESNA LM-79/IESNA LM-80 tested. It is mercury/UV free and conforms to "Green technology"/RoHS compliance. The correlated color temperature of the light meets American national standards. Light meets California title 24 building/electrical codes, Buy American Act, Recovery Act, Trade Agreements Act compliance.
|Catalog Description||STL110 SENSOR with 2 X HBLED13W COOL LED WHITE|