Schneider Electric / Square D LC1D38BL TeSys® D-Line Full Voltage Contactor; 3 Pole, 38 Amp Full Load, 575 Volt AC, 35 mm DIN Rail Mount

Detailed Description: Schneider Electric / Square D TeSys D Non-reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It operates at a current rating of 38 Amps and a voltage rating of 575 VAC. It can be suitable to control motor and also helps to resist load current. It has three poles and provides a cover for superior protection. It can be mounted on plate as well as rail with ease and has screw clamp type connection.

Contactor operates at voltage of less than or equal to 690 VAC with 690 VDC at 25-400 Hz for power circuit. It has AC control circuit type and has a circuit voltage of 24 VAC at 50/60 Hz. It produces a average impedance of 2 Ohm that operates at 50 Hz - It has 50 Amps for power circuit. It produces a power dissipation of 3 W AC-3 and 5 W AC-1. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is BV, CCC, CSA, DNV, GOST, UL certified.