Schneider Electric / Square D LC1D65E7 TeSys® D-Line Full Voltage Contactor; 3 Pole, 65 Amp Full Load, 600 Volt AC

Detailed Description: Schneider Electric / Square D TeSys D Non-reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It is used to control the motor and helps to resist load current. It operates at a current rating of 65 Amps and a voltage rating of 600 VAC. It has three poles and provides a cover for superior protection. Contactor can be mounted on plate as well as rail with ease. It operates at voltage of less than or equal to 300 VDC with 690 VAC at 25-400 Hz for power circuit. It has NEMA 4/4X/13 enclosure.

Contactor has AC control circuit type operates at 50/60 Hz and has a circuit voltage of 48 VAC. It produces an average impedance of 1.50 Ohm that operates at 50 Hz - It has 80 Amps for power circuit. It produces 6.3 W AC-3, 9.6 W AC-1 power dissipation per pole. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is CCC, CSA, GOST, UL certified.