Schneider Electric / Square D LC1D95M7 TeSys® D-Line Full Voltage Contactor; 3 Pole, 95 Amp Full Load, 575 Volt AC

Detailed Description: Schneider Electric / Square D TeSys D Non-reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It operates at a current rating of 12 Amps and a voltage rating of 575 VAC. It has four poles and helps to resist load current. It can be mounted on plate as well as rail with ease and has screw clamp type connection.

Contactor operates at voltage of less than or equal to 1000 VAC with 690 VDC at 25-400 Hz for power circuit. It has AC control circuit type and has a circuit voltage of 220 VAC at 50/60 Hz. It produces a average impedance of 0.8 Ohm that operates at 50 Hz - It has 125 Amps for power circuit. It produces a power dissipation of AC-3 and 12.5 W AC-1. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is BV, CCC, CSA, DNV, GOST, UL certified.