Contactors are designed to be directly connected to high-current load devices
Detailed Description: Square D by Schneider Electric IEC contactor is an electrically-controlled switch used for switching an electrical power circuit. A contactor is typically controlled by a circuit, which has a much lower power level than the switched circuit.
Application | Resistive load |
Brand | TESYS K |
Catalog Description | Schneider Electric,CONTACTOR 600VAC 9AMP IEC +OPTIONS,2 NO + 2 NC,20 A at <= 50 ¦C for power circuit,48 V AC 50/60 Hz,4P,LC1K,contactor,LC1K,resistive load,TeSys,TeSys K,UL Listed File E164862 NLDX2 - CSA Certified File LR43364 Class 3211 04 - IEC Rated 60947 - CE Marked,rail-plate |
Coil Power Rating | 4.5-4.5 VA 20 AC) |
Coil Voltage | [email protected]/60Hz |
Connection | SCREW CLAMP TERMINALS 1 1.5-4 MMASOLID- SCREW CLAMP TERMINALS 1 0.75-4 MMAFLEXIBLE WITHOUT CABLE END- SCREW CLAMP TERMINALS 1 0.34-2.5 MMAFLEXIBLE WITH CABLE END- SCREW CLAMP TERMINALS 2 1.5-4 MMASOLID- SCREW CLAMP TERMINALS 2 0.75-4 MMAFLEXIBLE WITHOUT CABLE END- SCREW CLAMP TERMINALS 2 0.34-1.5 MMAFLEXIBLE WITH CABLE END |
Contact Configuration | 2 NO + 2 NC |
Contact Rating | 20 A 50 AC POWER CIRCUIT |
GTIN |
00785901747444 |
Height | 2.28 |
Height Unit | IN |
Item Status | A |
Length | 1.9000 |
Length UOM | IN |
Maximum Load Current | 20 A 50 AC) <= 440 V AC AC-1 POWER CIRCUIT-16 A 70 AC) 690 V AC AC-1 POWER CIRCUIT |
Mfr. # | LC1K09008E7 |
Mounting | RAIL-PLATE |
Operating Cycles | 3600 CYC/H,<= 400 HZ |
Operating Temperature | -25-50 AC |
Size | 45 MM,57 MM,58 MM |
Special Features | 20 A AT <= 50 C FOR POWER CIRCUIT |
Standard | BS 5424-IEC 60947-NF C 63-110-VDE 0660,IP2X VDE 0106,UL-CSA,V1 UL 94-REQUIREMENT 2 NF F 16-101-REQUIREMENT 2 NF F 16-102 |
Sub-Brand | TESYS K |
Type | Contactor;LC1K |
UNSPSC | 39121529 |
Width | 1.77 |
Width UOM | IN |