Schneider Electric / Square D LC2D09U7 TeSys® D-Line Full Voltage Contactor; 3 Pole, 9 Amp Full Load, 600 Volt AC, 35 mm DIN Rail Mount

Detailed Description: Schneider Electric / Square D TeSys D Reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It is used to control the motor and helps to resist load current. It measures 3.540 Inch x 3.390 Inch x 3.030 Inch. It has three poles and provides a cover for superior protection. It is preassembled with reversing power busbar and can be mounted on plate as well as rail with ease. It has screw clamp type connection.

Contactor operates at voltage of less than or equal to 690 VAC with 690 VDC at 25-400 Hz for power circuit. It has AC control circuit type and has a circuit voltage of 240 VAC at rate of 50/60 Hz. It produces a average impedance of 2.5 Ohm that operates at 50 Hz - It has 25 Amps for power circuit. Contactor provides mechanical interlocking for safer use. It produces a power dissipation of AC-3 and 1.56 W AC-1. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is BV, CCC, CSA, DNV, GOST, UL certified.