Schneider Electric / Square D LC2D1156F7 TeSys® D Reversing Contactor; 3 Pole, 115 Amp, 110 Volt AC Coil

Detailed Description: Schneider Electric / Square D TeSys® D 3-Pole Reversing contactor is designed for industry, infrastructure, building motor control and starters application. It is featured with 1 NO + 1 NC integrated in standard coil auxiliary contact block with serrated wiping action. It comes equipped with cover to prevent manual movement of the contacts. Front mount dust tight auxiliary contact blocks allows for extended logic control operations. It is color-coded for easy identification and reduced wiring errors. Increased insulation distances between control and power for full compatibility with installations requiring very low control voltages. It measures 10.470 Inch x 5.830 Inch x 6.220 Inch. It features screw terminal to offer IP 2 terminals protected against direct finger contact. It is panel mount with screws for easy installation. It is designed to handle inrush power needs of 280 - 350 VA at 50 and 60 Hz. It has a hold-in power rating of 4.5 VA to keep the contractor closed.

Contactor has an operational voltage of 1000 VAC at 25 - 400 Hz and 300 VDC for power circuit. It has an operational current rating of 115 Amps, 200 Amps less than or equal to 440 VAC-3, AC-1 respectively for power circuit. Contractor has a motor power rating of 65, 80, 75, 59, 55, 30 kilo-Watts at 1000/660 - 690/500/440/415 - 440/380 -400/220 - 230 VAC, 50/60 Hz. It has a control circuit voltage of 110 VAC at 50/60 Hz for the closing or opening operation or both of the contactor. It can withstand rated impulse voltage of 8 kilo-Volts which does not cause breakdown under specified conditions test. It can withstand conventional free air thermal current of 200 Amps at less than or equal to 60 deg C with poles in closed position for power circuit respectively. It comes equipped with pneumatic time delay, mechanical latching blocks and interface modules and electronic timers for efficient operation.

Contractor is designed to operate at a temperature of -5 - 60 deg F and store at -76 - 176 deg F. It has a electrical durability of 0.95 Mega cycles, 115 Amps AC-3 and 0.8 Mega cycles, 200 Amps AC-1. It has mechanical durability of 8000000 cycles. It has rated insulation voltage of 600 Volts for power and signaling circuit for different standards to meet most of the industrial applications. It has average impedance of 0.6 milli-Ohm at 50 Hz. It operates at minimum switching current of 5 milli-Amps and voltage of 17 Volts for signaling circuit. It has an opening time and closing time of 6 - 20, 20 -50 milli seconds. It operates at rated breaking capacity of 1100 Amps at 440 Volts for power circuit. It has irms making capacity of 1260 Amps at 440 Volts for signaling circuit. It is provided with protective cover. Contractor is UL listed, CSA certified and RoHs compliant.