Schneider Electric / Square D LC2D115F7 TeSys® D-Line Full Voltage Contactor; 3 Pole, 115 Amp Full Load, 1000 Volt AC, 300 Volt DC, Plate/Rail Mount

Detailed Description: Schneider Electric / Square D TeSys D Reversing contactor is suitable for switching a power circuit, similar to a relay except with higher current ratings. It is used to control the motor and helps to resist load current. It measures 10.470 Inch x 5.830 Inch x 6.220 Inch. It has three poles and provides a cover for superior protection. It is preassembled with reversing power busbar and can be mounted on plate as well as rail with ease.

Contactor operates at voltage of less than or equal to 1000 VDC with 690 VDC at 25-400 Hz for power circuit. It has AC control circuit type operates at 50/60 Hz and has a circuit voltage of 110 VAC. It produces a average impedance of 0.6 Ohm that operates at 50 Hz - It has 200 Amps for power circuit. Contactor provides mechanical/electrical interlocking and has operating rate of 3600 cyc/h. It produces a power dissipation of 24 W AC-1 and 7.9 W AC-3. It meets the standards of EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and is BV, CCC, CSA, DNV, GOST, UL certified.