Contactors are designed to be directly connected to high-current load devices
Detailed Description: Square D by Schneider Electric IEC contactor is an electrically-controlled switch used for switching an electrical power circuit. A contactor is typically controlled by a circuit, which has a much lower power level than the switched circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.
Warranty: https://s3.amazonaws.com/cesco-content/unilog/Batch7/785901/100036-WarrantyURL.pdf
Application | MOTOR CONTROL |
Brand | TESYS K |
Catalog Description | Schneider Electric,CONTACTOR 600VAC 6AMP IEC +OPTIONS,10 A at <= 50 ¦C for signalling circuit-20 A at <= 50 ¦C for power circuit,24 V DC,3 NO,3P,LP4K,contactor,LP4K,motor control,TeSys,TeSys K,UL Listed File E164862 NLDX2 - CSA Certified File LR43364 Class 3211 04 - IEC Rated 60947 - CE Marked,plate-rail |
Coil Power Rating | 1.8-1.8 W 20 AC |
Coil Voltage | POWER CIRCUIT 690 V AC 50/60 HZ-SIGNALLING CIRCUIT <= 690 V AC 50/60 HZ |
Connection | SCREW CLAMP TERMINALS 1 1.5-4 MMASOLID- SCREW CLAMP TERMINALS 1 0.75-4 MMAFLEXIBLE WITHOUT CABLE END- SCREW CLAMP TERMINALS 1 0.34-2.5 MMAFLEXIBLE WITH CABLE END- SCREW CLAMP TERMINALS 2 1.5-4 MMASOLID- SCREW CLAMP TERMINALS 2 0.75-4 MMAFLEXIBLE WITHOUT CABLE END- SCREW CLAMP TERMINALS 2 0.34-1.5 MMAFLEXIBLE WITH CABLE END |
Contact Configuration | 1 NC,3 NO,INSTANTANEOUS 1 NC |
Contact Rating | 20 A 50 AC POWER CIRCUIT-10 A 50 AC SIGNALLING CIRCUIT |
GTIN |
00785901641605 |
Height | 2.28 |
Height Unit | IN |
Item Status | A |
Length | 2.5000 |
Length UOM | IN |
Maximum Load Current | 6 A<= 440 V AC AC-3 POWER CIRCUIT |
Mfr. # | LP4K0601BW3 |
Mounting | PLATE-RAIL |
Operating Cycles | 3600 CYC/H |
Operating Temperature | -25-50 AC |
Size | 45 MM,57 MM,58 MM |
Special Features | BUILT-IN BIDIRECTIONAL PEAK LIMITING DIODE SUPPRESSOR |
Standard | UL-CSA,V1 UL 94-REQUIREMENT 2 NF F 16-101-REQUIREMENT 2 NF F 16-102 |
Sub-Brand | TESYS K |
Type | CONTACTOR |
UNSPSC | 39121529 |
Width | 1.77 |
Width UOM | IN |