Contactors are designed to be directly connected to high-current load devices
Minimum brytestrom 5 Milli-Amp for signalling circuit
Non overlap distance 0.5 mm
Overvoltage category III
8 Kilo-Volt Impulse withstand voltage
LP4K0610EW3 Square D LP4K0610EW3 IEC Contactor, <= 440 VAC, 48 VDC Coil, 6 A, 50/60 Hz, 3-Pole, 3NO
Warranty: https://s3.amazonaws.com/cesco-content/unilog/Batch7/785901/100036-WarrantyURL.pdf
Brand | Square D by Schneider Electric |
Coil Voltage | 48 Volt |
Connection | Screw Clamp |
Contact Configuration | 3 NO |
Degree Of Protection | IP2x |
Environmental Conditions | -50 To 80 deg C Storage Temperature, Vibrations Contactor Closed 4 Gn, 5...300 Hz Iec 60068-2-6, 2000 M Uten Derating In Temperature, Shocks Contactor Opened, On x Axis 10 Gn For 11 Ms Iec 60068-2-27 |
Impulse Withstand Voltage | 8 Kilo-Volt |
Insulation Voltage | 690 Volt For Hovedstrom Conforming to IEC 60947-4-1, UL 508, 600 Volt For Signalling Circuit Conforming to UL 508, 600 Volt For Hovedstrom Conforming to CSA C22.2, No 14 |
Item | Contactor |
Maximum Breaking Capacity | 110 Amp at 415 Volt Conforming To IEC 60947, 110 Amp at 440 Volt Conforming to IEC 60947, 80 Amp at 500 Volt Conforming to IEC 60947, 110 Amp at 220 to 230 Volt Conforming to IEC 60947, 110 Amp at 380 to 400 Volt Conforming to IEC 60947 |
Mfr. # | LP4K0610EW3 |
Motor Power | AC3 1 Phase 115 Volt 0.5 hp, AC3 1 Phase 230 Volt 1.5 hp, AC3 3 Phase 200 Volt 1.5 hp, AC3 3 Phase 230 Volt 1.5 hp, AC3 3 Phase 460 Volt 3 hp, AC3 3 Phase 575 Volt 3 hp |
Mounting | DIN-Rail/Screw |
Number Of Poles | 3 |
Operating Cycles | 3600 Cycle/Hour |
Size | 45 mm Width x 57 mm Depth x 58 mm Height |
Standards | UL Listed File/CCN #E164353 / NKCR, CSA Certified File #LR43364 3211 03, IEC 60647-1-1, BS 5424, IEC 60947, NF C 63-110, VDE 0660 |
Sub Brand | TeSys® K |
Temperature Rating | -25 to 50 deg C |
Torque Range | 7 Inch-lb |
Wire Size | Control 12-18 AWG, Power 12-18 AWG |