TPI/Raywall P3PUH25CA1 UH Series Fan Forced Unit Heater; 480 Volt, 30 Amp, 85300 BTU, 1350 cfm, 50/60 Hz, 3 Phase, Circular Copper Clad Steel Heating Element, Horizontal/Panel Mount, Powder-Coated, Ivory

Detailed Description: TPI/Raywall UH Series 3-Phase Fan forced unit heater in ivory color is rated at 480 Volts/25 kilo-Watts/30 Amps at 50/60 Hz and provides air flow of 1350 cfm at 56 ft. Heater features a totally enclosed, permanently lubricated, thermally protected one-speed motor for optimum performance. Fan assembly is enclosed by a heavy-gauge, close-spaced, chrome-plated wire guard. It has an enclosure made of durable 18-gauge steel with corrosion-resistant powder-coated finish and adjustable discharge louvers for directional control of air flow. It provides an output of 85300 BTU and is designed to be mounted at a height of 13-ft horizontal. It measures 24 Inch x 17 Inch x 17 Inch.

Heater has a durable circular copper clad steel sheath element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade for superior heat transfer. An auto-reset thermal cutout disconnects power from the element if an overheated condition occurs without stopping the fan to dissipate excess heat from the element. Heater has control compartment housing, a master terminal board with a hinged and latched access door that simplifies wiring, installation/maintenance. It can withstand a temperature rise of 58 deg F. It includes a disconnect switch for convenient operation. Heater can be panel mounted horizontally. It included a fan delay switch to evacuate residual heat from the unit after the heating element has cycled OFF. It is designed for indoor commercial/industrial use. Heater is cETLus listed.