Delayed action arc containment - all devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulationcavity making it impossible to withdraw a live plug
Flap cover or screw cover option - flap cover option must provide weathertight capability by utilizing a spring actuated self closing flap, watertight capability shall be obtained by using a gasketed crew cap
Polarization - all devices shall be factory polarized for amperage, voltage, frequency and phase; thus providing a single voltage rating, single interface system
The grounding of the device shall be accomplished through a separate center ground (earth) make-first and break-last pole on all devicesfor complete system grounding
Pole capabilities - all devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connectorbodies (5 pins total)
Interiors must be male (pin type) or female (sleeve type) and pins and sleeves shall also be self-aligning and self-wiping/self-cleaning
Detailed Description: Thomas & Betts MaxGard®, Russellstoll® 4-Pole 3-Phase Pin and sleeve connector features flap cover or screw cover option to provide provide weathertight capability by using a spring actuated self closing flap. It has a current rating of 200 Amps and voltage rating of 277/480 Volts. Connector accommodates fives strand or flexible wires of size 4/0 - 19 AWG. It is polarized to provide single voltage rating and interface system. Connector is grounded through separate center ground and offers self-aligning as well as self-wiping/self-cleaning. Connector meets UL 1010, 231, 1682 and 1686, File No. E2630, E57324, E68085, E123752 and CSA C22.2-182.1 file number LR14096 standards.
Application | Electrical hook-up of mobile medical imaging (MMI) trailers |
Brand | Russellstoll |
Catalog Description | MaxGard Female Flap Cap Connector, 200 Amp, 4 Pole 5 Wire, 30Y 277/480V, 60Hz |
GTIN |
00708917177043 |
Item Status | A |
Mfr. # | DF2504FP000 |
Special Features | "Waterproof construction provides environmental separation at the front of each device (they don't have to be connected together just to be called ""watertight"")" |
Type | MaxGard Interconnection Systems |
UNSPSC | 39121406 |