Dimension: 8-1/4 Inch Dia x 16-3/8 Inch Depth
Unit includes (4) prewired 20 Amp receptacles
Each duplex receptacle is wired as a separate circuit
The duplex can be wired as a standard receptacle or isolated ground
Wiremold open System unloaded inserts to accept four discrete keystone connectors from most manufacturers are provided
Includes ortronics tracjack mounting bezel and ortronics series-II communication housing
Detailed Description:
Wiremold / Walker Ratchet-Pro Multi-service assembled poke thru device has brushed aluminum flange with black nonmetallic cover. It is approved for tile and carpet floor. It has a capacity of 24.5 cubic inches. Assembly delivers significant power and communication services directly to the workstation. It has two duplex receptacle with a current rating of 20 Amps that can be wired in the field as a standard or isolated ground receptacle. It requires a cored hole of diameter 4 inches. Assembly with slide doors has four ports for connecting devices to provide a seamless interface for voice, data and fiber optic applications.
Device includes Wiremold® open system unloaded adapters to accept four discrete keystone connectors. It measures 8-1/4 Inch diameter x 16-3/8 Inch. It also includes Ortronics TracJack Mounting adapters and Ortronics series II communication housing. It has an intumescent insulation. It has 1/2-Inch & 3/4-Inch trade size knockouts. It has retaining clips and step on it for mounting. Assembly is UL and cUL listed and meets article 300.21, 300.22[C], 314 of NEC.
Brand | LEGRAND-WIREMOLD |
Catalog Description | Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors. |
GTIN |
00786564131526 |
Height | 17.3800 |
Height Unit | IN |
Item Status | A |
Length | 8.7500 |
Length UOM | IN |
Mfr. # | RC4ATCAL |
UNSPSC | 39121328 |
Width | 8.7500 |
Width UOM | IN |